Coveted by top professionals for decades, passive EQs have better phase coherence than active designs, and the inductors offer a rich, smooth harmonic quality.

IThe EQP-200B is an indispensable component to many key task's in the studio. From tracking to final touches and audio sweetening, the EQP-200B is the goto EQ!

The EQP-200B is the perfect finishing tool for any mix - just insert it across the master buss of your mixing console or DAW. The sonic benefits from the EQP-200B's exceptional passive tube circuit are apparent even with the EQ circuit in bypass mode.

Each piece of Summit gear is meticulously crafted by hand in our shop using only the best quality components and attention to detail. Quality components and engineering know-how are the critical element to the sound and longevity of audio gear.

Power Configuration


  • Internal AC Supply
  • 35 watts, 115 or 230 volts, 50 or 60 Hz (Rear Switchable)
  • Fuse Size: 0.5 Amp for 115 VAC, 0.25 Amp for 230 VAC
Selectable Frequencies


  • Low Frequency Shelf / In / Out
  • 3 position togle: 6 dB per octave shelving filter starting at 50 Hz, or standard engaged operation, or
    bypass mode
  • Low Frequency Boost and Cut
  • 20, 30,60, 100, 180 Hz frequencies.
  • Mid-High Frequency Boost and Cut
  • 1.5k, 3k, 5k, 8k, 10k, 12k, and 16k Hz frequencies.
  • High Frequency Cut
  • select at 5k, 10k and 20k Hz frequencies.

  • Connections

  • Inputs: +4 dB female XLR (2)
  • Outputs: +4 dB male XLR (2)
Max level


  • Max input level (XLR): +23dB
  • Max output level (XLR): +23dB
  • Max gain: +/-20dB

Operating Measurements


  • Frequency response:
  • Tube: 12Hz-45kHz -0.5dB
  • Signal to noise ratio:
  • Tube: 125dB average 20Hz-20kHz
  • THD + Noise:
  • Tube: 0.057% 12Hz-20kHz
  • Vacuum tubes: three 12AX7A

Warranty


  • 3 year limited warranty.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

EQP-200B Dual Channel Parametric Equalizer

  • Brand: Summit Audio Inc
  • Product Code: EQP-200B
  • Availability: NOT AVAILABLE FOR SALE

Related Products

12AX7 Vacuum Tube

12AX7 Vacuum Tube

Vacuum Tube used in all Summit tube based products..

SA990 OP-Amp

SA990 OP-Amp

OP-Amp used in all full rack Summit product...

Fuse 1A/250 8AG

Fuse 1A/250 8AG

Fuse 1A/250 8AG used internally in all Summit products...

Power Transformer Big

Power Transformer Big

Power Transformer Big used in all full rack units..

KNOB DCL

KNOB DCL

Small knob used in some of Summit full rack and half rack units...

SPDT-L ON-ON

SPDT-L ON-ON

Two Positions, Single Pole, Double Throw,  SPDT Toggle Switch ON-ON used in full rack Summit un..

SPDT L ON-OFF-ON

SPDT L ON-OFF-ON

Three Positions ON-OFF-ON SPDT Toggle Switch used in full rack units.TLA-100Attack,Release, Lin..

DPDT-L ON-ON

DPDT-L ON-ON

Two positions DPDT switch for DCL-200 "Link" function with lugs...

LAMP CML757

LAMP CML757

28V Power Bulb for Summit Everest ECS-410All newer Summit products uses this bulb for Power lens. Pl..

LAMP CM120MB

LAMP CM120MB

120V Power Lamp bulb marked 120MBMost of the old full rack units uses this lamp in Power Lens. Pleas..

N113B

N113B

Stereo Jack..

Full Rack Top

Full Rack Top

Full Rack Top Cover..

FUSE .5A/250V SB

FUSE .5A/250V SB

FUSE .5A/250V SB external used in all units...

DPDT L ON-OFF-ON

DPDT L ON-OFF-ON

Three positions DPDT switch ON-OFF-ON..

2K5 Lin Pot

2K5 Lin Pot

2K5 Linear PotentiometerEQP-200 -MF Band..

1K Lin

1K Lin

1K Linear PotentiometerEQP-200 - HF Cut..

Lens RED

Lens RED

Red Lens for full rack units..

Knob EQ

Knob EQ

Knob used in EQP and EQF..

Knob EQ Old

Knob EQ Old

Knob used in EQP and EQF original devices...

Tags: EQP-200B